There was an error in this gadget
There was an error in this gadget

Friday, October 28, 2011

A98L-0001-0518#T Fanuc Key Sheet Replacement




Fanuc MDI membrane 33 keys type Fanuc A98L-0001-0518#T, protecting your CNC Lathe Machine Operator panel next to your Fanuc CRT monitor.


This FANUC Cover Sheet is for series 0T, 0TA, 0-TB, 0-TC, 0-TD including variations of systems generations such as A, B, C (ie: 0A, 0B, 0C, etc...).



Fanuc membrane key sheets, which are soft covers for the keyboards fitted and connected to a variety of Fanuc control systems. The Membranes are also fitted on GE Fanuc versions of the controls, and in some cases they were specifically made for a manufacturer such as Harginde, Bridgeport, Leadwell, Colchester, Gildermeister, Takisawa, Makino and many more. The are several hundred membranes, and we carry an extensive stock, but can obtain any not on the list also. The membrane sheets cover the MDI part of the CRT/MDI or the seperate MDI unit, dependant on FS configuartion, and the Operator Panel on horizontal or vertical 9 inch, mono or color from systems 10, 11, 12, 15, 16, 18, 20, 21, 0A, 0B, 0C, 0D, 0E, 0F, 0G, 0P, 0M, 0T and other 0 series generations from turning lathe, machining center, grinder, press and punching machines with GE Fanuc controls.

Find you reference online on CNC-Shopping Website.

Fanuc A98L-0001-0518#M02 Key Sheet Replacement


Fanuc  A98L-0001-0518#M02 MDI membrane 33 keys protecting your Machine FANUC MDI unit next to the Fanuc 9 inch monitor.
This FANUC Cover is for Fanuc control series 0M, 0-MC, 16M, 18M, 21M including variations of systems generations such as A, B, C (ie: 0A, 0B, 0C, etc...) This FANUC Key sheet membrane A98L-0001-0518#M02.

Find it on CNC-Shopping website.

Tip to replace your old membrane: When you remove your old protective Key Sheet (rubber film Fanuc A98L), be sure to clean the surface using a dedicated product. Repeat if necessary until no more traces of glue on the metal surface of your Fanuc keyboard. Once the surface of your keyboard is clean, the edges of the protective sheet is adhesive. Install the keysheet Fanuc A98L-0001-0518#M02 New on the front of the keyboard in accordance with the direction and orientation. Avoiding then any deposit of dust and other dirt from the protective sheet rubber Fanuc Fanuc and keyboard.

Wednesday, October 12, 2011

SHARP LQ10D368 LCD 10.4 Color Monitor Solutions

SHARP LQ10D368 - Find it, Buy it, Replace it on your CNC Machine-Tools.

SHARP LQ10D368, Each pixel of an LCD typically consists of a layer of molecules aligned between two transparent electrodes, and two polarizing filters, the axes of transmission of which are (in most of the cases) perpendicular to each other. SHARP LCD 10.4" Color monitor reference SHARP LQ10D368 for sale on the webstore Cnc-shopping. This SHARP LCD panel 10,4" may be mounted on several CNC Controls or any other application requiring a LCD display 10.4 color. With no actual liquid crystal between the polarizing filters, light passing through the first filter would be blocked by the second (crossed) polarizer. In most of the cases the liquid crystal has double refraction

Wednesday, June 29, 2011

Fanuc Batteries - Buy them online !

Fanuc batteries 
Security not an issue? That is a mistake. There is always the risk of a power failure which could turn out to be expensive in terms of cost and time. CNC memory loss can happen quickly. So preventive maintenance is the key to being ready for action!

FANUC Lithium Battery A98L-0031-0026
PANASONIC BR-2/3A 3V Battery A98L-0031-0006
PANASONIC BR-AGCF2W 6V Battery A98L-0031-0011
PANASONIC BR-AGCT4A 6V Battery A98L-0031-0025
PANASONIC BR-C 3V Battery A98L-0031-0007
PANASONIC BR-CCF2TH 6V Battery A98L-0001-0902
SANYO CR17335SE-R Battery A98L-0031-0006
SANYO CR17450SE-R Battery A98L-0031-0012

 The CNC battery and servo drive battery should be regularly checked and changed periodically to preserve the contents of the memory. The batteries allow back-up of both CNC and servo drive data. When low battery voltage is activated, loss of CNC and servo drive programs, offsets and parameters will be noticed within a week. So spare FANUC batteries should be kept here and now in readiness for when it happens.

Sunday, June 5, 2011

Vos pièces détachées FANUC - Pièces détachées Machines-outils - FANUC - Cnc-shopping

Vos pièces détachées FANUC - Pièces détachées Machines-outils - FANUC - Cnc-shopping


Prolongez la durée de vie de vos commandes numérique FANUC en achetant vos pièces détachées FANUC et solutions CNC en ligne sur CNC-Shopping.com, site de vente en ligne pour la maintenance de Machines-outils CNC. CNC-Shopping International, acteur de l'industrie CNC et connaissant une croissante importante depuis les dernières années. Le site de vente en ligne propose des solutions pour le remplacement et dépannages de vos pièces détachées de Machine-outils CNC à commande numérique FANUC. (Alimentation Fanuc AlphaAutomate FanucBouton FanucCarte d'axe FanucCarte d'alimentation Fanuc )
CNC-Shopping International a pour but d'augmenter la durée de vie de votre parc Machine FANUC et diminuer vos couts de maintenante tout en réduisant vos temps d'arrêt de production.

FANUC LTD, dont le siège mondial est situé au pied du Mont Fuji au Japon, est la société la plus diversifiée au monde dans les automatismes (FA / Factory Automation), les robots industriels et les Robomachines. Depuis sa création en 1956, FANUC a contribué à l'automatisation des machines-outils, en étant le pionnier dans le développement des commandes numériques CNC. Carte d'orientation FanucPièces Fanucpupitres Fanuc La technologie de FANUC a contribuée à la révolution des processus de fabrication dans le monde entier, depuis la machine la plus simple jusqu’à l'automatisation de lignes de production complexes. FANUC développe des produits toujours plus performants et fiables qui s’adaptent naturellement aux besoins du vingt et unième siècle.

Aujourd'hui, au xxie siècle, les automatismes sont légion autour de nous, rien que dans notre logement : les machines à laver le linge, la vaisselle, le réfrigérateur à dégivrage automatique, le réveil, etc, comportent au moins un automatisme. Dans l'industrie, ils sont indispensables : ils effectuent quotidiennement les tâches les plus ingrates, répétitives et, dangereuses. Parfois, ces automatismes sont d'une telle rapidité et d'une telle précision, qu'ils réalisent des actions impossibles pour un être humain. L'automatisme est donc aussi synonyme de productivité et de sécurité.

Vos pièces détachées FANUC - Pièces détachées Machines-outils - FANUC - Cnc-shopping

Vos pièces détachées FANUC - Pièces détachées Machines-outils - FANUC - Cnc-shopping

Friday, April 29, 2011

SIEMENS SIMODRIVE 6SN1123 6SN1145 dans l'industrie...


Les certificats concernant les produits SIEMENS SIMODRIVE 6SN1123 6SN1145 décrits dans cette documentation se trouvent sur Intranet http://intra1.automation.siemens.com/org/mc/qm Vous les trouverez sous Thèmes Q→ Certificats →  SIEMENS 6SN1123-1AB00-0CA0 .Produits ou prenez contact avec le correspondant du département A&D MC de la société Siemens AG. Toutes les déclarations de conformité, les certificats tels que CE, UL, etc.  concernent les composants système décrits dans les manuels de configuration les catalogues et ne sont donc valables que lorsque les composants décrits sont mis en oeuvre dans l’appareil ou l’installation. SIEMENS SIMODRIVE, SIEMENS 6SN1145.




Les variateurs SIEMENS SIMODRIVE (comme 6SN1123-1AA00-0BA0) font partie du matériel d’exploitation à mettre en oeuvre dans des installations à courant fort et sont exploités avec des tensions qui en cas de contact peuvent entraîner de graves blessures ou la mort !

Tuesday, April 19, 2011

SIEMENS SIMODRIVE 6SN1123 steps your Industry up to maximum productivity.

SIEMENS SIMODRIVE 6SN1123 steps your machine up to maximum productivity

With the SIEMENS SIMODRIVE 6SN1123 converter system individual drive assemblies can be combined thus enabling fast and flexible synchronization of the drive performance and number of machine axes.

The SIMODRIVE 611 converter system is suitable for:

  • Machine tools
  • Robot and manipulators
  • Mass production and jobshop production
  • Form and tool construction
  • Presses and packaging machines
  • Production machines for glass, wood, stone and textiles
SIEMENS SIMODRIVE 6SN1123 consists of several individual function modules. The mains connection is achieved using a power rated row of infeed modules, which provides the 600 V power DC link as well as the electronic power supply. Power modules rated to the size of the motor are then hooked-up to the 600 V DC link. The closed-loop plug-in unit then forms the drive module to a main spindle module or feed module either in digital or analog technology.

   SIEMENS 6SN1123-1AA00-0AA0 SIMODRIVE LT-Module Int 15A
   SIEMENS 6SN1123-1AA00-0AA1 SIMODRIVE
   SIEMENS 6SN1123-1AA00-0BA0 SIMODRIVE LT-Modul Int. 25A
   SIEMENS 6SN1123-1AA00-0BA1 SIMODRIVE
   SIEMENS 6SN1123-1AA00-0CA0 AXIS DRIVE BOARD
   SIEMENS 6SN1123-1AA00-0CA1 AXIS DRIVE BOARD
   SIEMENS 6SN1123-1AA00-0DA0 SIMODRIVE
   SIEMENS 6SN1123-1AA00-0DA1 Simodrive LT-Module 80A
   SIEMENS 6SN1123-1AA00-0EA0 Axis drive SimoDrive LT-Module 160A
   SIEMENS 6SN1123-1AA00-0EA1 Simodrive 611 LT- Modul 160A
   SIEMENS 6SN1123-1AA00-0FA0 Simodrive 611 LT-Modul Int. 200A
   SIEMENS 6SN1123-1AA00-0FA1 Simodrive Power Module Int. 200A
   SIEMENS 6SN1123-1AA00-0HA0 SIMODRIVE Int 8A
   SIEMENS 6SN1123-1AA00-0HA1 Simodrive 611 LT-Modul Int 8A
   SIEMENS 6SN1123-1AA00-0JA0 Simodrive Axis drive Int. 300A
   SIEMENS 6SN1123-1AA00-0JA1 Simodrive 300A
   SIEMENS 6SN1123-1AB00-0CA0 Simodrive 611 dual axis drive 2x50A
   SIEMENS 6SN1123-1AB00-0CA1 Simodrive 2 axis 2x50A
   SIEMENS 6SN1123-1AB00-0CA2 Servo drive 2 axis 2x50A

The types of drives feed axes, main spindle drives and asynchronous motor drives can be combined to form axis units.
A full range feed drives is available with torques from 0.7 Nm to over 145 Nm. In the case of main spindle drives SIEMENS SIMODRIVE 6SN1123 611 achieves a continuous rating of 3.7 kW to 100 kW. For simple main spindle drives without encoder, e.g. wood processing machines and high-speed grinding machines, the SIMODRIVE 611 offers closed-loop plug-in units with field-oriented closed-loop control for speeds of up to 60,000 rev/min.

Modular

The modules have standard designs, 480 mm high, 288 mm depth and, depending on the performance, the width increases in units of 50 mm.
  • In the drive units each module carries out a different task
  • A common feed module provides the DC voltage link from the power supply mains
  • A drive module activates every motor
  • Every drive module consists of a power module and closed-loop plug-in unit
  • The NCU of the SINUMERIK 840 D CNC control is integrated as a 50 mm wide module

Wednesday, February 23, 2011

PSA: Your Car Can't Get A Virus From Your iPod (Seriously)

In a tech savvy world built on code and the interwebs, basically everything is programmable, including the songs on your iPod. And by programmable, we mean that everything digital can be composed of what we know and expect, but sometimes, it can also contain something… more.

This is mostly due to the massive switch from analog signals to digital signals. Analog signals can be converted or parsed into a digital bitstream from which a programmer can route or control which vector to manipulate. An example includes most modern vehicle stereos, which contain an ADC – Analog-to-Digital – to equalizer connection which converts analog signal to digital. From there, the signal is returned through a Digital-to-Analog Converter or DAC for short; rinse and repeat. The theory is that somewhere along the way code can parse the digital content. The odd part is that it’s totally legit and “legal” on pirated music. A61L-0001-0093

To say that a virus could be coded onto pirated music and then transferred to a vehicle’s infotainment system, while quit plausible, is theoretically pointless unless the information from a random person’s car is valuable enough to take the time to code such a monster. Not to mention that it’s almost impossible to be incognito while attempting this feat while on the fly. When sending a digital signal over an analog connection, a driver would hear a series of beeps indicating the conversion. Since the driver would have to be playing his stereo, a hijacking would be an obvious give away every time. In the end however, no hacker would have the drive to code a program that would be destined to fail. And that’s where the Reddit thread below goes. Check it out for a quick laugh.

Monday, February 14, 2011

Boeing To Debut 747-8 Intercontinental This Weekend


There’s nothing quite like flying; it amazes me that it used to take 30 years to travel from east coast to west. Now, after a magazine and a quick snooze, you’re on the other side of the country.
The 747 is no doubt one of the most popular model numbers for commercial jets, and tomorrow Boeing is going to show off its newest version: the 747-8. We don’t know more yet, other than whats on Boeing’s website:

The 747-8 Intercontinental is the only jetliner in the 400- to 500-seat market, stretched [18.3 ft] from the 747-400 to provide 467 seats in a three-class configuration and a [8,000 nautical mile] range. Using 787-technology engines, the airplane will be quieter, produce lower emissions, and achieve better fuel economy than any competing jetliner. The 747 Intercontinental will provide nearly equivalent trip costs and 13 percent lower seat-mile costs than the 747-400, plus 26 percent greater cargo volume….The 747-8 is more than 10 percent lighter per seat than the Airbus A380 and will consume 11 percent less fuel per passenger than the 555-seat airplane. That translates into a trip-cost reduction of 21 percent and a seat-mile cost reduction of more than 6 percent, compared to the A380. Fanuc parts.


Thursday, February 3, 2011

Heidenhain Glass Scales technology LS, LB, LF ML

Sealed linear encoders from HEIDENHAIN are protected from dust, chips and splash fluids and are ideal for operation on machine tools. An aluminum housing and elastic sealing lips protect the scale, scanning carriage and guideway from chips, swarf, dirt and splashwater The scanning carriage travels in a low-friction guide within the scale unit. It is connected to the external mounting block by a coupling that compensates unavoidable misalignment between the scale and the machine guideways.
Sealed linear encoders are available with full-size scale housings for high resistance to vibration up to 30 m measuring length, as well as slimline scale housing for limited installation space up to 2040 mm measuring length. Heidenhain Linear encoders


 Heidenhain LS-107 Scale 1140mm 
 Heidenhain LS-107 Scale 640mm
 Heidenhain LS-107 Scale 940mm
 Heidenhain LS-186 ML 240mm linear Encoder
 Heidenhain LS-303 Scale 1340mm
 Heidenhain LS-303 Scale 270mm
 Heidenhain LS-303 Scale 370mm
 Heidenhain LS-303 Scale 420mm
 HEIDENHAIN LS-303 Scale Seal
 Heidenhain LS-303C Scale 420mm
 Heidenhain LS-403 Scale 270mm
 Heidenhain LS-403 Scale 320mm 
 Heidenhain LS-403 Scale 470mm 
 Heidenhain LS-403 Scale 570mm
 Heidenhain LS-404 Scale 470mm
 Heidenhain LS-404 Scale 670mm
 Heidenhain LS-513 Scale 220mm 
 Heidenhain LS-603 Scale 1020mm
 Heidenhain LS-703 Scale 1140mm
 Heidenhain LS-703 Scale 620mm
 Heidenhain LS-704 Scale 620mm
 Heidenhain LS-803 Scale 720mm
 Heidenhain LS-903 Scale 520mm
 HEIDENHAIN Scale Reader Head AE LS-303C


Heidenhain Monitors BE412 BC110, BC120

HEIDENHAIN's MANUALplus NCs have been proving themselves in daily use on action-oriented lathes for many years now, but with the introduction of the new MANUALplus 620, HEIDENHAIN marks another step toward simple and efficient programming on the HEIDENHAIN Monitor. With this new control and its increased functions, now both cycle and CNC lathes can effectively be handled by HEIDENHAIN Screen
At the heart of the new MANUALplus 620 is a new NC kernel. With it, the cycle programming feature of this control enables the machinist to quickly and efficiently program and machine workpieces without having to write NC programs on the Heidenain Monitors HEIDENHAIN BC110, Heidenhain BC120, BE110, BE110B, BE111, BE135, BE212, BE411, Heidenhain BE412, BE412B, BF120 TNC.
This new control also includes the implementation of a tool database (up to 250 tools) and a technology database. The MANUALplus 620, as a whole, is designed as an integrated digital servo-drive control, though the spindles and/or axes can also be controlled by analog speed command interfaces as well.

Monday, January 31, 2011

Yaskawa robot as a Chef.

Yaskawa robot as a chef, ready to cook for you :)


The multi-talented Motoman SDA10, a dexterous dual-arm industrial robot manufactured by Yaskawa Electric, is demonstrating its ability to cook okonomiyaki at the International Next-Generation Robot Fair now underway in Osaka. Yaskawa Parts
Designed to operate independently alongside humans in the workplace, the 135-centimeter (4.5 ft) tall, 220-kilogram (480 lb) industrial robot has 15 joints -- 7 in each arm and one in the torso -- allowing a wide range of motion for the job, whether it be on the factory floor or behind the kitchen counter.

As a chef, the Motoman relies on speech recognition technology to take verbal orders from customers. Using standard kitchen utensils, the robot mixes the okonomiyaki batter, pours it onto the iron grill, forms it into a round pancake-like disk, flips it, puts it on a plate when done, and applies condiments.
No word yet on the taste.

FANUC Robots Assembling and Disassembling keypads


















Robots Assembling and Disassembling keypads



Two FANUC M-1iA robots assembling and disassembling 10-key keypads at high speeds. The robots are equipped with iRVision 2D allowing them to locate the keys on the keypad. These robots are lightweight and compact six-axis parallel link robots. The parallel link structure provides higher speeds and accuracy compared to traditional assembly robots. The M-1iA is designed for small part handling, high speed picking and assembly applications. It has a 3 axis wrist which makes it extremely flexible and versatile compared to traditional SCARA robots. FANUC Keyboard






FANUC Robots make a career in Cinema for Louis Vuitton.

FANUC for Louis Vuitton


The company, Autofuss, has recycled three FANUC s430iL industrial robots from the automobile industry to convert them to the arts and entertainment industry.
The three robots (Puck, Gilda and Rosie) are now cameramen.
They can take complex and accurate shots and we’ve recently been able to catch a glimpse of them in a commercial for Louis Vuitton.
A Fanuc s430iL measures 2.23 m in height and weighs 1301 kg.
The robot can carry 125 kg and its arm has a range of 3 meters. It moves at a speed of 2 m per second and has an accuracy of +/- 0.3 millimeters. Fanuc Servo Amplifiers


INDRAMAT - Part, repair, spares, exchange...


Indramat was acquired by the hydraulic concern Rexroth in 1965, in order to gain competence in machine control. At that time, Indramat was moved to the German town of Lohr am Main, Rexroth’s headquarters. In 1968 Rexroth, including Indramat GmbH, was taken over by Mannesmann AG. In 2001, after the hostile takeover of Mannesmann by Vodafone, the industrial portion of Mannesmann was acquired by Robert Bosch GmbH, including Rexroth and Indramat. The new entity was named Bosch Rexroth, and Indramat GmbH became the Electric Drives and Controls Technology Group under Bosch Rexroth. The name Indramat was no longer used.
In 2001 Indramat employed 1,500, with a turnover of 261 million Euro. Exports constituted 52% of the business.